Notes.ini Entry


Name:
    COMnumber

Syntax
    COMnumber=Parameter1, Parameter2, ...

Applies to:
    Workstations and/or Servers

Add-on:

    First Release:

      Obsolete since:

        Category:
          Setup, Client Config

        Default:
          Depends on the modem type selected

        UI equivalent:
          File - Preferences - Notes Preferences - Ports dialog box

        Description:
        Specifies information for modems connected to the ports you set in the Ports dialog box. You can define up to five ports (COM1 through COM5). These parameters are valid:
        ParameterSpecifiesRequired?
        driverDriver nameYes
        unit_IDUnit IDYes
        max_sessionsMaximum number of concurrent sessionsYes
        buffer_sizeSize of buffer in kilobytesYes
        flagsFlags, such as secured channel, log modem I/O, enable RTS/CTS, and so onNo
        modem_speedModem speedNo
        modem_volumeModem volume and dialing modeNo
        modem_filenameName of the modem command fileNo
        dial_ timerConnection timeout in secondsNo
        hangup_timeoutIdle hang-up time in minutesNo

        Unless you are experienced with modems and ports, use the user-interface to configure ports.